Renewal Parts

Renewal Parts

  • XRBL ADALET MECHANICAL RESET BUTTON, LONG BARREL, EXPLOSIONPROOF, SPECIAL OPERATORS

    ADALET

    XRBL ADALET MECHANICAL RESET BUTTON

    DATA SHEET Used for resetting contactors, relays, etc. for explosion-proof and weather-proof enclosures. Made with 3/4" NPSM threaded stem. Standard operating shaft length 6" can be cut to length. Special lengths are available also. Use XRBL for wall...

  • ACS150-03U-02A4-4 VFD, 3 PHASE, 1HP, 0.75kW, 2.4A, FRAME SIZE R1, 380-480V, AC SUPPLY, ABB AC MICRO DRIVE

    ABB

    ACS150-03U-02A4-4 VFD 3 PHASE 380-480V, AC MICRO DRIVE

    DATA SHEET Overview ABB micro drive ACS150 is designed to be incorporated into a wide variety of machines such as mixers, conveyors, fans or pumps or anywhere where a fixed speed motor needs to go variable speed motor.   Worldwide...

    $358.00
    Add to Cart
  • MODULAR SELECTOR SWITCH-3 POS MAINTAINED/MOMENTARY, B AND C FIXED, SPRING RETURN FROM A TO B
SHORT HANDLE
BLUE
ILLUMINATED
BLACK PLASTIC
NO CONTACT BLOCK
COMPACT
SIGNALING FOR TOWERS AND BEACONS

    ABB

    M3SS7-11L MODULAR SELECTOR SWITCH

    MODULAR SELECTOR SWITCH-3 POS MAINTAINED/MOMENTARY, B AND C FIXED, SPRING RETURN FROM A TO B SHORT HANDLE BLUE ILLUMINATED BLACK PLASTIC NO CONTACT BLOCK COMPACT SIGNALING FOR TOWERS AND BEACONS

    $28.50
    Add to Cart
  • KIT FC CuAI 14-1/0 AWG XT2 3pc UL/CSA, FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3PCS XT2 UL/CSA, ABB, REPLACEMENT FRONT TERMINALS KIT FC CuAI 14-1/0 AWG XT2 3pc UL/CSA, FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3PCS XT2 UL/CSA
3 POLE
XT2 FRAME SIZE
1/0 AWG LUGS
ACCESSORIES-LUGS, TERMINALS
ABB BRAND

    ABB

    FRONT TERMINALS 3PC KIT

    KIT FC CuAI 14-1/0 AWG XT2 3pc UL/CSA, FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3PCS XT2 UL/CSA 3 POLE XT2 FRAME SIZE 1/0 AWG LUGS ACCESSORIES-LUGS, TERMINALS ABB BRAND  

    $21.82
    Add to Cart
  • E 91/30 CC is a fuse holder for overcurrent and short circuit protection specific for class CC fuses

UL STANDARDS 4248-1 & UL4248-4
600V
30A
60Hz
1 POLE
CLASS CC FUSE TYPE
LOCK TYPE: PADLOCKABLE
ABB BRAND

    ABB

    E 91/30 CC FUSE HOLDER

    E 91/30 CC is a fuse holder for overcurrent and short circuit protection specific for class CC fuses UL STANDARDS 4248-1 & UL4248-4 600V 30A 60Hz 1 POLE CLASS CC FUSE TYPE LOCK TYPE: PADLOCKABLE ABB BRAND

    $8.23
    Add to Cart
  • Allen-Bradly 30mm Selector Switch Push Button
Maintained, Key removal from right
2 position selector switch
10 Amp
Material = Metal
Standard block type
18-14 AWG conductor size
2 NO, 2 NC Contact Configuration
Hole mounting type
2 position
Screw terminal type
600 VAC/VDC
800T-H3204B SELECTOR SWITCH (800T-H3204B)

    Allen-Bradley

    800T-H3204B SELECTOR SWITCH

    Allen-Bradly 30mm Selector Switch Push Button Maintained, Key removal from right 2 position selector switch 10 Amp Material = Metal Standard block type 18-14 AWG conductor size 2 NO, 2 NC Contact Configuration Hole mounting type 2...

    $219.00
    Add to Cart
  • ABB, AUTOMATIC TRANSFER SWITCH- ATS021 - WITHOUT DIALOGUE FOR CONTROLLER ON MULTI VOLTAGE

ARC-FLASH PROTECTION

Multi-function logic to meet all requirements

• Standard switching logic allows monitoring of the normal and emergency line, sending commands to the generator and controlling that the circuit-breakers have been switched

• Management of both the two non–priority lines (ATS021, ATS022);

• Management of a third bus-tie circuit-breaker (ATS022);

• Management of non-priority load disconnection. No auxiliary power supply required. The new ATS family is designed to work without an auxiliary power supply. An auxiliary power supply is only required when Modbus RS485 communication is used or in networks with 16 2/3 Hz rated frequency.



Compliance with IEC and EN 60947 Standards Compliance with the IEC and EN 60947 Standards allows the new ATS family to provide the quality and safety needed for all requirements

Compatibility with ABB circuit-breakers and switch-disconnectors The ATS family can be used with ABB SACE Tmax (XT1... XT4, T3...T7) and Emax (X1, E1...E6) series of circuit-breakers and switch-disconnectors, fitting into a complete and coordinated system. 

Advanced communication interface ATS022 is equipped with a communication unit which allows integration with the supervision systems via Modbus RS485.

Furthermore, ATS022 is fitted with a graphic display which makes parameter configuration and display extremely simple. Applications The ATS family is particularly suited to use in all emergency power supply systems where a solution which is simple to use, reliable and rapid to install is required. Below are some of the main applications of ATS:

• Power supply for UPS units;

• Operating theatres and primary hospital services;

• Emergency power supplies for civil building, hotels and airports;

• Data banks and telecommunication systems;

• Power supply of industrial line for continuous

Line-generator If the main network goes down, the ATS021 and ATS022 devices allow management of switching over to the emergency line fitted with a GenSet system.



Line-line If the main network goes down, the ATS021 and ATS022 devices allow switching to a second line used as a reserve line. ATS022 allows you to select which of the two lines available is to be the priority line. Management of non-priority loads by means of a bus-tie Should the main network go down, the ATS022 device allows you to switch to a second line used as a reserve line, disconnecting the non-priority loads (NPL) shunted from the main busbar.

Management of two independent power supply lines separated by a bus-tie If one of the two power supply lines goes down, the available line supplies both the load side sections by means of the bus-tie (ATS022).

Management of the non-priority loads on the outgoing line If the main network goes down, the ATS022 device allows switching to a second line used as the reserve line, disconnecting the non-priority loads (NPL) by means of a bus-tie



AUXILIARY POWER SUPPLY-NOT REQUIRED
MAX 480 VAC
50,60HZ
DOOR MOINTING/DIN RAIL MOUNTING
OPERATING MODE-AUTO/MANUAL
FEATURES- GENERATOR START-UP
BUS-TIE
NO-PRIOTITY LINE
PRIORITY LINE SELECTION
ALSO FEATURES- GENERATOR TEST MODE
ABB, AUTOMATIC TRANSFER SWITCH, ATS,EXCO, HURRICANE, GENERATOR, PREPAREDNESS

    ABB

    ATS 021

    ABB, AUTOMATIC TRANSFER SWITCH- ATS021 - WITHOUT DIALOGUE FOR CONTROLLER ON MULTI VOLTAGE ARC-FLASH PROTECTION Multi-function logic to meet all requirements • Standard switching logic allows monitoring of the normal and emergency line, sending...

    $791.88
    Add to Cart
  • FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3pcs XT2 UL/CSA

FRONT FOR COPPER-ALUMINIUM CABLES
SUITABLE FOR XT2
UL489 STANDARDS
3 POLES
ACCESSORY FOR TMAX XT
ACCESSORY TYPE: 1/0 AWG lugs, KIT FC CuAl 14-1/0 AWG XT2 3pcs UL/CSA, FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3pcs XT2 UL/CSA, Product ID: 1SDA075841R1
EAN: 8015644798185

    ABB

    KXT2CUAL 1-3PC KIT

    FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3pcs XT2 UL/CSA FRONT FOR COPPER-ALUMINIUM CABLES SUITABLE FOR XT2 UL489 STANDARDS 3 POLES ACCESSORY FOR TMAX XT ACCESSORY TYPE: 1/0 AWG lugs

    $19.32
    Add to Cart
  • FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 2x 500-750 kcmil 3pcs XT5 UL/CSA, ABB, ACCESSORY FOR TMAX XT, SUITABLE FOR XT5, 3 POLE, KXT5CUAL2X750KC-3 KIT, 1SDA115948R1, 8056221080606, KIT FCCuAl 2x500-750kcmil XT5 3pcsUL/CSA, Terminal Connection Type:
Front for Copper-Aluminium Cables

    ABB

    KXT5CUAL2X750KC-3 KIT

      FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 2x 500-750 kcmil 3pcs XT5 UL/CSA   3 POLE UL489 STANDARDS SUITABLE FOR XT5 TERMINAL CONNECTION TYPE: FRONT FOR COPPER-ALUMINIUM CABLES ACCESSORY FOR TMAX XT

    $264.25
    Add to Cart
  • FRONT TERMINALS FOR CABLESIN COPPER 14-1/0 AWG 3 PIECES XT1 UL/CSA

ABB BRAND
3 POLES
ACCESSORY FOR TMAX XT
UL489 STANDARD
SUITABLE FOR XT1
TERMINAL CONNECTION-FRONT FOR COPPER-ALUMINIUM CABLES
KXT1CU-3PC

    ABB

    KXT1CU-3PC

    FRONT TERMINALS FOR CABLESIN COPPER 14-1/0 AWG 3 PIECES XT1 UL/CSA ABB BRAND 3 POLES ACCESSORY FOR TMAX XT UL489 STANDARD SUITABLE FOR XT1 TERMINAL CONNECTION-FRONT FOR COPPER-ALUMINIUM CABLES

    $22.03
    Add to Cart
  • KXT4CUAL1-3PC (KXT4CUAL1-3PC), LUG KIT FOR ABB XT4 CIRCUIT BREAKERS. SACE TMAX XT4 ACCESSORY.

3 PIECE KIT
FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3 PCS XT4 UL/CSA
ABB FRONT CONNECTION TYPE- FRONT FOR COPPER-ALUMINIUM CABLES
UL489 STANDARDS, CONNECTION VANE/PHASE SPREADER, SMALL EQUIPMENT, 3 POLES, ATLAS, UL489, XT4, LOOSE OR CONFIGURABLE, PRODUCT ID 1SDA075857R1, EAN 8015644798345, ABB ACCESSORY PART FOR TMAX.

    ABB

    KXT4CUAL1-3PC

    LUG KIT FOR ABB XT4 CIRCUIT BREAKERS. SACE TMAX XT4 ACCESSORY. 3 PIECE KIT FRONT TERMINALS FOR CABLES IN COPPER-ALUMINIUM 14-1/0 AWG 3 PCS XT4 UL/CSA ABB FRONT CONNECTION TYPE- FRONT FOR COPPER-ALUMINIUM CABLES UL489 STANDARDS

    $22.03
    Add to Cart
  •  TNIA1200 NEUTRAL KIT, ABB, GE, XT7ENCL1200R, GROUNDABLE INSULATED STANDARD, FOR USE WITH: CIRCUIT BREAKER ENCLOSURE, 250 TO 350 kcmil, 250 to 500 kcmil lug, NEMA 1/3R/ 12 ENCLOSURES.

    GE

    TNIA1200 NEUTRAL KIT

    ASM NEUTRAL WITH GROUND STRAP, ABB/GE NEUTRAL KIT, 1200AMP, 600V AC, 3x250 TO 500 MCM, CU, 3x250-500 MCM AL

    $289.43
    Add to Cart
Compare Selected